Just add it in photo shop, like a well known conversion shop;

[][/img]

Turbopete wrote: ↑Tue Jul 22, 2025 11:17 am Looks tidy - id be interested to see how it feels with solid mounts - im thinking about going solid on the next build.

There is a TINY bit of isolation from the rubber subframe mounts

That would mean 21 units, there’s potential for for 10/12 in the floor, 6/8 in the front and to keep the weight about right i would need 8 in the boot. This would raise the net weight of the mini by around 120 kg


Splitting the battery into 3 adds complication and potential failure points. Do ...

Guess this was a giant waste of time then...


I think it's an idea who's time will come, it's a neat unit, almost an electric diff it's so compact and I'm seeing plenty of MGs on the road so they should soon be plentiful and cheap at the breakers. Perhaps it will take off when we all come out of ...

Cable tie lifting straps - B*****y Brilliant!

Sounds like a steam train in the slow motion shots

Thanks, yes I actually took the info of the part from him, very great blog. And Greg is also aware of the part I have. I just have to figure out how to reduce this Pushrod.


The push rod should look somewhat like this;
image.png

just unscrew the clevis Cut off the amount you need ( you might ...

Have you looked at Lar's web site? Lots of useful information on the I-booster

https://www.evcreate.com/installing-the-ibooster/

See this too from Greg;

viewtopic.php?p=50084#p50084

Alibro wrote: ↑Wed Nov 27, 2024 10:48 pm Just so long as it doesn't fall of the wall first time you set a screwdriver on it.

The shelf will be fine; the screwdriver will simply roll off and impale itself in one of Greg's batteries

Hi Greg,
Would you have any dimensions for the cell hold down bolt holes?
Cheers

Would something like this work?

https://www.ebay.co.uk/itm/274834275816 ... 1c0364d088

Jacobsmess wrote: ↑Wed May 29, 2024 6:32 am Have you tested the fit of those HV covers? Bigp8e printed some off for me recently but the piece clashes with the downward facing coolant port on the inverter.

There is an updated version on Grabcad now,
https://grabcad.com/library/gs450h-side-port-1

arber333 wrote: ↑Mon May 20, 2024 11:49 am Why not use the speedo internal drive lines to drive the speedo from PWM directly.

I'm guessing the OP has a cable driven mechanical speedo rather than an electronic one?

An Arduino with a stepper motor should work. The speed could be a problem, as you need up to approx. 3000 rpm.


This place has a stepper motor that should do;

https://www.omc-stepperonline.com/12v-3000rpm-0-048nm-15w-1-9a-round-%D1%8442x53mm-brushless-dc-motor-42blr53-12-01?search=42blr53 ...

Grab the flywheel/flexplate and "clutch" saves finding a clutch plate from something else it also gives you the option of mounting the complete clutch assembly to your locking plate to provide some cushioning to the driveline.

Gregski wrote: ↑Mon Feb 26, 2024 4:22 pm Is proper packaging illegal in the UK? asking for a friend

A lot of breakers seem to see packaging as a cheap way of getting rid of rubbish they would otherwise have to pay for some one to take away, I guess you were unlucky and ordered just after bin day

Brattitude sent me one of his boards to try on an early zombie and while the D1 was better it still wasn't great. I initially had issues connecting with with the ESP32-WROOM-32 on Johu's latest mini main board but it seems that was due to me having the current limit on my ( cheap Chinese so don't ...

Personally, the fewer boxes the better but I have struggled with poor comms so do see the benefit of a more robust communication system.

As a UK based customer finding a way around customs charges would offer about a 20% saving ( Damien seems to manage but I don't know if that's due to the luck or ...

Before I apply any power can someone please confirm this mini main board is the right way up on the adapter board? I've assumed the text direction should match the adapter board but we all know what assumptions lead to.

Gregski wrote: ↑Wed Jul 26, 2023 1:50 pm is anyone looking at this?

Oh we're looking! Your thread is undoubtedly one of the most useful on here - certainly to other EV novices like me and also I'm sure to others with limited engineering / spannering experience. Keep up the good work

but I don't know what any of that 12K, 18K, or 24K British Thermal Units even means, nor do I want to learn how to speak British


Don't worry most brits don't like BTU! for quick refrence 24,000 BTU = 7kW = almost 10 hp.

P.S. A BTU is defined as the amount of heat required to raise the ...

johu wrote: ↑Mon Jul 17, 2023 9:53 am A pdf version is now available in the shop: https://openinverter.org/shop/index.php ... duct_id=73

Still working on the printed version, lets see if I get to sign them

I don't seem to be able to get past this page;

Updated side input port is now on Grabcad, the M20x1.5 thread prints a little lose on one of my slicers and a little tight on the other (Flashforge and Cura) . The small overhangs and threaded holes all print OK without support for me but YMMV. Let me know how you get on.

IMG_20230717_105749.jpg ...

I'm keeping my fingers crossed for you

PatrcioEV-ATX wrote: ↑Wed Jul 12, 2023 4:19 pm This looks great. Does this incorporate the offset lengths of the posts that Damien sells? If so, I'm in!

Yes, it's designed to work with the Damien's design of posts. I'm printing a confirmation over the weekend and if it's all OK I'll release it next week.