is this already converted to openinverter or just the DCDC mod done?

Hello,

apon looking further into this i believe saw that c93 on the schematic needs a 47uf cap which I have placed in the c93 slot but on the voltage check im only getting -1.47v where i should be getting -5v? any help please?

also the v1d board BOM isnt up on the github as far as i can see only ...

Hello All,

I need a little help if possible I've just finished soldering all the parts to my V1D board and I seem to be short C93 this was a kit from the BMW webshop and there is a greater than 0% chance it was included and I've launched it into the atmoshpere without noticing it even existed ...

Hello Johu,

BMS wise I'm not planning on running one I'm planning on using the prius inverter to bulk charge to 95% (slowly) and then I'm planning on building an onboard balance charger to balance the battery and charge the last 5% the charging swithcing will probally be manual until I get ...

Update 10/10/21.... second rewrite because computers!

I've had some time off so naturally I'm now feeling Ill!

I have made some progress the battery pack is now split and I have got the cells out (bar 1 i damaged!)
the motor and driveshafts have been extracted ready for the new motor to go in and ...

Hello everyone! update here

sorry for the late update been working for 9 days straight and todays my first day off.

I've made a little progress with things here and there

The box is off, This is held on by 6 (or maybe 8) bolts in the floor that screw into the chassis and you guessed it glue! I ...

Hello Everyone

Just introducing my project its an aixam mega van! "mega" like the "super" in a suzuki super carry.
its a small (hideous acording to my partner) electric van.

this van is a salvage from london where as per the standard the batteries have been stolen...

https://i.ibb.co/LnpGhpS/IMG ...