No idea :D
I am trying to use a Teltonika FMC650 device as a remote gateway to my own EV conversion.
Used a PI before, but really wanted to save some energy, as the pi uses a lot.
The FMC650 seemed interesting, but its very immature:
Config tool doesn't work reliable at all
manual CAN messages are ...

thats a nice find, thanks!
Will try to construct some DBC out of it and see if it fits

Yep I know, but maybe theres some info out there.
There are several repos on GitHub, but they dont include the EV related messages.

Hi everyone,

i am looking for the CAN definitions of the EV related parameters in J1939.
There are several available, like

• min and max cell voltage
  packV
  packCurrent
  SOC
  SOH
  etc

Maybe anyone here came across these definitions?

Thanks,
Marco

One of the packs is gone.
New price for the other one (12 modules): 1900 Euro

Pricedrop:
150 Euro per Taycan module, 17 modules available

Hi,

I am selling my CCS2 DC Fastcharger.
Its assembled with very good components into some small aluminum case which has been designed for this purpose.
It uses an Advantics SECC as a charge station controller and a Maxwell Powermodule, as well as a Bender iso165 Insulation monitor.

Its great for ...

Hi,

I am selling my i3 LIM, as I eventually decided to use a different solution.
This offer includes:
-i3 LIM with MAC address printed on it (6135-6828052-01)
-Muehlpowers voltage monitoring PCB
-Plugkit

Price 300 Euro (OBO)

Selling a drive System which has been removed out of a BMW Mini electric Prototype.

It's based on the ACP150 drive system, which also has been used in a modified way in the early 1.5 Tesla Roadster.
Comes with the following components:

-Power Electronics/ inverter with charger included
-Motor ...

Selling 24 Modules which I didnt end up using.
Its either two full packs or 24 separate modules.

Price per Module: 300 Euro
Price per pack: 3k Euro

Located just south of Bremen/GERMANY.

Selling 17 Taycan Modules which were left over from a project.
Tested them for 2 cycles. Capacity and isolation resistance are fine.

Price 250 Euro each.

Located just south of Bremen/Germany.

Still for sale. Two packs in total, so 24 Modules.

7 cells in series, so 25.9 V nominal

Dimensions: 91 cm x 18 cm x 9 cm
weight approx. 18 kg

Would sell each pack for 3300 Euro
or 320 Euro per Module

No, thats not a good option I guess
needs too much space and weight.

Hi,

did anyone actually take a Gen2 Charger apart?
I have 2 with one bad phase each here and thought I could make one perfect charger out of them. But damn, how do you get the phase modules out there?
I removed the cooling plate, but no additional screws there.

Probably need to unsolder the ...

Hi,
i have some (3 I think) brand new IVT-S-2K5-U3-I-CAN2-12/24 left from some abandoned project.
Price would be 280 Euro

Shipping only makes sense within Europe I think?

Tesla Small Drive Unit, new revision with the Oil Pump.

Thought it would be fun to play with it, but then didnt find the time. So its unopened.

I paid 1600 Euro and would sell it for the same price.

Location Bremen/Germany

This batterypack was planned to be used as a stationary storage. But instead of using two packs, we ended up using one pack.
Donor car Odo was 42000 km.
Pack is opened and BMS removed to avoid discharging, Modules were not touched and are still in place.
The Pack will come with the BMS, so it could ...

Selling my new Orion BMS, as I am using Taycan Modules which have their own BMS
The Set contains:
Orion 2 Battery Management System- Standard 96
- Cell Tap 12ft (2x)
- Cell Tap 6ft
- Main Connector Harness
- Current Sensor Harness
- Thermistor Expansion Harness
- Thermistor Expansion Module
- 750A ...