More pics of the motor teardown!

TLDR: Its pretty awesome. 47kg motor+inverter combo. 17kg for the gearbox+diff

Here we go!

First, every number I could find on the device (for those interested).
IMG-20231204-WA0005.jpg
IMG-20231204-WA0006.jpg
IMG-20231204-WA0007.jpg
IMG-20231204-WA0008.jpg ...

Hello chaps.

I wasnt able to weigh the assembly today as my cable hoist (with scale) is sitting at a friend's garage right now.

Heres some pics of the principal dimensions:

L-R.jpg
Left to right of the enclosed space (sans (without) mounts) measures 470mm


Front back.jpg
Front to back ...

Hey guys. Thank you for all the support and comments!
Ill be taking some measurements today and will post my picturesque findings a little later.


Hi Alwyn,

I'm planning a project using i-Miev parts here in NZ, but that new unit looks really interesting. Have you weighed it? Actually the weight ...

Happy first post!

You could make quite the business of exporting components if it's of interest to you. www.car-part.com has all your pricing references for the USA. I'm sure there are others for the rest of the world too.

https://openinverter.org/wiki/Mitsubishi_Outlander_Rear_Inverter will get ...

I am pretty sure green/blue wire is CAN twisted pair. Rest is 12V supply and NOTAUS. GND is on the motor case.

If you have a DUE CAN board or a CAN reader i could send you simple instructions to observe what kind of
Traffic is on the line.
I could also send you my can shield you can connect ...

Thanks for checking. Would be an amazing opportunity to have access to affordable parts.


I just replied to Jacobs PM, but basically I suggested the trans-Siberian land bridge

https://rzdlog.com/for_clients/Trans-Siberian_LandBridge/

It looks like it may be a viable option for quick and cheap ...

As far as I know, the i-miev motor is the same as the rear traction motor from the GG2W model outlander. There is an additional parking brake thingy on there that the Outlander doesnt have, but in terms of actually running the motor I suspect it would be exactly the same.

Ladies and gentlemen!

Ive been a long time lurker on this forum and this is my first actual post.

Id like to share my recent acquisition, the rear differential from a 2022 Outlander (GN0W) .
1.jpg
2.jpg
As you can see its a total redesign from the GG2W type weve all seen. In particular, the ...