Converting a gs450h is what i planned
And now i have a 100% working gs Runs and drives

Now on how to trick the system i have some (untested) ideas for now
As i drive the car 40+km and the battery is lower then 80% the ecu will send a signal to mg1 to run the engine

Edit (If the car is stand ...

Hi there i was watching some videos about diy ev chargers and i found this github open Sourced ev charger
that was sold as a kit by http://www.emotorwerks.com around 7 years ago but now thay are not selling it anymore
I was thinking if we could get it done by jlcpcb or maybe someone here Can ...

Hi there i was watching some videos about diy ev chargers and i found this github open Sourced ev charger
that was sold as a kit by http://www.emotorwerks.com around 7 years ago but now thay are not selling it anymore
I was thinking if we could get it done by jlcpcb or maybe someone here Can bring ...

Hi guys thank you all for replying here
Thanks johu and damion you guys are hero's
I am ordering these boards to do some testing and when my project is finished i will support damion and johu
On patrion

Now i got the car
And i am slowly buying and collecting parts
And i am thinking of ...

\
I have joined here in 2019 and and at that time the gsvcu.v2 was ready and done and i put it in my jlc cart but i got bussy with life and things got messy
I decided to wait and when i came back i opend jlc and the order expired as it hasn't been submitted for a year
I redownloaded files and ...

I think if you are serious about this you will have to spend time studying the whole process, nobody is going to do it for you.
A year or two of hard work should be enough.
From your other posts it sounds like you know a lot less than I do and I wouldn't know where to start but I suspect getting ...

I am on a tight budget to be honest i want to do some experiment with these boards and i might need more then 1 to do so

damion is kind enough to make it opensorced and i am a fan of hem and what he hes been doing
Thanks


****edit***

Lol v3 vcu. That’s in active development. It’s not a ...

I am on a tight budget to be honest i want to do some experiment with these boards and i might need more then 1 to do so

damion is kind enough to make it opensorced and i am a fan of hem and what he hes been doing
Thanks

HI GUYS today I WAS TRYING TO ORDER GS450H VCU.V3 FROM JLC PCB WITH SMT Assembly
BUT THE PAGES ASKES ME TO Fill in layer sequence THAT I DONT KNOW
CAN SOMEONE HELP ME WITH THIS
THE PAGE ASKES ME for ALL 4 layers sequences
L1(Top layer)
L2(Inner layer1)
L3(Inner layer2)
L4(Bottom layer)

thanks

any updates?

[/quote][/code]No idea, but I built an earlier version of the controller that Damien has released, using a $15 PCB from a fab company in China, with around £30 of components, so, what's the point?

If anyone is interested, I can cut down the schematics for a my early controller, which accepts a ...

hi guys i found a Forum that (mauswerkz) who converted a bmw with the gs450 gearbox and inverter he shared some of his work and what hed did
it might help us improve damions uc controler

https://forum.e46fanatics.com/showthread.php?t=1125667&page=4

https://www.diyelectriccar.com/forums ...

Hi guys
Can i use Haltech ecu or unichip instead of damion's uc (microcontroler) is it possible ??

I just wanted you guys to tell me where to aim

Damien publishes everything on GitHub ( here ).



Thanks a lot Kevin

I have a question can we connect a 3rd motor to the input shaft and connect wires to the lexsus inverter or maybe to a 2nd controller and put a button in the dash to run the ...

Hi there sorry
I know what i am dealing with i am learning about ev conversion from 5 years now i also build my own lithium ion packs and i do soldering the only down side is i didnt do pcb board before (i can hire a professional for pcb)
But i first want try doing it my self

I know its a hard ...

Hi guys i was always wanted to convert my lexsus to ev and now i am ready (with your help) now my main problem is to design the opensorceCommunicating for gs450 i dont know how to start and i dont know any basics about pcb boards and how to put parts on it and programing it can some one lighten me ...