Some interesting progress reports (I think)
https://myimiev.com/threads/mg-midget-conversion.5854/post-53340
https://myimiev.com/threads/mg-midget-conversion.5854/post-53342

Feel free to leave your comments here or on the iMiEV forum.
We'll keep putting the detail there and the links here as ...

Some CAD work updates that might be inspirational to others, again on the iMiEV forum
https://myimiev.com/threads/mg-midget-conversion.5854/#post-53034

Just a teaser below.

When trying fitment, a scan can be really helpful.
We used RealityScan with great success on an ordinary smartphone.

image ...

We are now more active on the iMiEV forum as we will directly transfer the complete system.
I will keep posting links to the updates on the iMiEV forum here.
If you could respond on the iMiEV forum though.

@tomhanman "Way to kill a conversation." We are talking directly now ;-), so I hope you are ...

Mathias started sharing dbc related information on the iMiEV forum.
To keep all information in one place, I will post the link here:
https://myimiev.com/threads/can-network-reverse-engineering-creating-dbc-imiev.5788/#post-52071

I hope it is of help! Please add your comments there.
We will keep ...

Thank you for the link Toby!
We will post our progress soon.

We will post as much as we can, but we use the Peugeot iOn.
CAN messages might be a bit different (?).
We will open up for sure.

I think we will open a separate thread for
- CAD work
- CAN reverse engineering

Thanks Ben! We will have a look.

Small update:
The OBD reader is not working to reset fault codes.
This morning we hooked up a (clone) DiagBox 9.xx and we could reset all error codes.
The car is running again. So for Peugeot iOn and Citroën C-Zero, it is best to have the DiagBox tool.

I think the ...

CAN1 and CAN2 can still be read without issues.
We also had a broken auxiliary battery (very low voltage) when having the CAN issue.
Not sure how/if this is related to the non-starting car.

I ordered a better OBD reader (VLinker FS Bluetooth) to work with CarScanner for resetting DTC's.
My cheap ...

There is a problem compiling GVRET code. I tried when setting up a 2nd Due before searching the forum. Use GVRET firmware updater about half way down the page.

Thank you! Worked like a charm.

We could read CAN1 properly. Then when adding CAN2 (together with CAN1), the car became a non-runner ...

'Our project team' just finished their exams and they are now on the project. We will keep you posted here.
I hope tomorrow to unplug different devices on CAN1 and see when the vehicle stops running.
We did not manage to get Arduino Due running today (I think compile issue in https://openinverter ...

Thank you Tom! I will add my information there.

I have a question. I am now going in detail through the Belgian regulation, and I would rather immediately store my findings on the Wiki. Could somebody add the page Belgium to legalities? Then I will add the Belgian rules there.

Regard,
Tomas

Sorry, as I didn't follow the basic rules to check carefully before posting, here are the links to what we will start with:
- https://openinverter.org/wiki/Getting_started_with_CAN_bus
- https://openinverter.org/wiki/CAN_bus_with_Arduino_Due

I'll keep you posted of our progress (waiting for the ...

I am so excited to join this community with my son and his friend. Our project will be to install the complete iMiEV powertrain to an MG Midget and try to get it pass Belgian regulations. We will have a lot to learn, but still, we will try to contribute as good as we can.

We will post in future ...