thanks
yes lost email address on this one Bigpie sorted it out so will use this one from now on

will update my project now as its on the MOT now

SimpBMS V2.3 on a vw PASSAT GTE HIGH VOLTAGE HYBRID BATTERY 3Q0804842F 13kw

Its ok just got one off ebay for £250 used with screen

Thanks just manual did state not sported, as it does work do you or any body know were the best place to buy it?

Hi I am try to find a BMS that will support cell balancing on VW Passat GTE pack?

the battery is "UK 055 Car Battery - 12V 35Ah - HONDA TOYOTA NISSAN SUZUKI"

i am only running the contactor lights and windscreen wiper with it, have not got power steering, brakes and no electric windows.

The if you use a resistor it would not keep a constant voltage drop as the load changed, I ...

Outlander Dc DC charging a small 12v battery.

I am seeing to much current as 6amp @ 14.4 Volts sense wire is directly on the battery and the battery is full charged and out gassing.
My fix is to use a high current diode, DC-DC output and sense wire on the terminal thou diode to + on battery losing ...

I would like drive a digital speedo to.
have you had any answer or have you do it another way?

I wired it up and its working fine, but the is no 120ohm termination in the inverter?

https://sitaltech.com/can-bus-terminati ... eflections.

Great many thanks

Thanks it only shows the wire on the external car loom lead. I need the pinout from the pcb inside the inverter header with these coloured wires

I have Rear Inverter with the socket missing does any one know the wires i should use
Can Bus and low voltage I have the following wire colours green,black,white,grey,violet,blue,yellow,brown,orange?
needed to connect it to ZombieVerter
Thanks

hi
The Can Bus and low voltage I have the following wire colours green,black,white,grey,violet,blue,yellow,brown,orange?

Hi
I have inverter with the socket missing does any one know the wire colour i should use ?
Thanks