How big is it? I think it has a radius of 40cm with the housing.

Could you please share the diameter of the spline shaft and the spline count on it?

I want to figure out a clutch the fits on the spline shaft so that I adapt the motor side to a manual gearbox directly and the splined shaft side ...

Actually, at the moment there is a key question: will the Prius inverter be able to control the e-booster with a speed of 120,000\min, 48 volt, 2.8 kW.
As I understand it, the motor is induction (IM).

Link to article: https://www.researchgate.net/publication/305649356_Electrification_of ...

I don't know what the standalone TCM requires for inputs but I would assume a minimum of wheel speed, engine speed and load I would also assume these would be CAN but this would need research. It also depends on how Sk1d plans on using it, I.e either ICE or electric mode, ICE and electric together ...

Yes but how do you make it all work together? As you going to have 101 buttons and dials to adjust while driving?


Thanks for the answer!

There should be at least a minimum of buttons; the car will have an electronic throttle and an electronic pedal. I am considering the possibility of making ...

Hi guys! Please tell me I have an idea to assemble an old BMW from 1977 with a native engine, with turbocharging and an electric motor. If you are interested in the project, I can send detailed photos. At the moment, there is a BMW 8hp45 engine with an automatic transmission, there were thoughts to ...