IPace iBooster
-
- Posts: 1801
- Joined: Sun Apr 03, 2022 1:57 pm
- Has thanked: 102 times
- Been thanked: 350 times
IPace iBooster
I've been looking at iBoosters recently and noticed that IPace ones seem significantly cheaper than the identical looking Tesla Gen1 iBoosters. A little research suggests that the IPace ones are Flexray rather than CAN bus though. Can anyone confirm this? If they are Flexray do they still have the CAN bus interface as well?
- EV_Builder
- Posts: 1205
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 18 times
- Been thanked: 37 times
- Contact:
Re: IPace iBooster
No clue do you have name plate data? Is it Bosch?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.
- Bratitude
- Posts: 965
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 154 times
- Been thanked: 334 times
- Contact:
Re: IPace iBooster
many other vehicles use bosch iboosters. i have one from a chevy volt. i know new honda CRVs and some toyotas, use them as well. they are canbus. if your looking to skip the tesla tax
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components
- EV_Builder
- Posts: 1205
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 18 times
- Been thanked: 37 times
- Contact:
Re: IPace iBooster
are those bosch boosters all the same protocol wise?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.
- Bratitude
- Posts: 965
- Joined: Thu Jan 02, 2020 7:35 pm
- Location: Canada
- Has thanked: 154 times
- Been thanked: 334 times
- Contact:
Re: IPace iBooster
no, they each have different can ids, but the open pilot gtihub has a lot of dbc files, should cover most
https://bratindustries.net/ leaf motor couplers, adapter plates, custom drive train components