Ford Eluminator- have you got yours working?

Post Reply
52I
Posts: 6
Joined: Sun May 22, 2022 10:44 pm

Ford Eluminator- have you got yours working?

Post by 52I »

Have you had success getting your Eluminator running? Ford doesn’t appear to be supporting it and i haven’t found any electronics examples other than a few diy.

Thanks
tmiit71
Posts: 3
Joined: Sun Dec 24, 2023 4:17 pm
Has thanked: 1 time

Re: Ford Eluminator- have you got yours working?

Post by tmiit71 »

Hi, I decided to go the Eluminator route as well after seeing AEM's mustang swap. Fuel2electric dot com is a good source of info as well.
Tutti466
Posts: 2
Joined: Fri Dec 29, 2023 3:20 am

Re: Ford Eluminator- have you got yours working?

Post by Tutti466 »

Hello, I am new to this. I just bought a Ford Mach-E motor and am just starting to look for components and everything necessary for my first project. I am not sure yet whether to use it in an early Bronco or a Mustang Foxbody, but that is the least of my concerns. I realize that there are not many resources available for working with this motor. Any help? Cascadian has theirs, but it’s crazy, 12k for an inverter. At least that’s what I think.
User avatar
johu
Site Admin
Posts: 5537
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 147 times
Been thanked: 917 times
Contact:

Re: Ford Eluminator- have you got yours working?

Post by johu »

The cheapest inverter solution will set you back around 400€ - that is Prius inverter gen2 or 3 with OI control board capable of around 400A on the AC side.

For about 100€ more you get a gen2 Leaf inverter with control board capable of 700A
https://openinverter.org/shop/index.php ... duct_id=57
https://openinverter.org/shop/index.php ... duct_id=63
http://evbmw.com/index.php/evbmw-websho ... ted-boards
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Tutti466
Posts: 2
Joined: Fri Dec 29, 2023 3:20 am

Re: Ford Eluminator- have you got yours working?

Post by Tutti466 »

Do you believe that buying an inverter from the Mach-E and using a potentiometer could work? Or do you think it will come encrypted?
https://www.ebay.com/itm/364393365870
Post Reply