Nissan Leaf ZE1 AC compressor LIN

[tom91]

or try to log / playback to the compressor not attached to the car.

You got a LIN setup with an arduino might be worth trying.

Playing back is not possible with the USB Analyser.

[aot93]

I don't,
But I should have the bits to make a LIN setup, just a level shifter required by the looks of it?

[Marat]

Check CRC? ID47

[tom91]

Check CRC? ID47

The CRC is calculated as the Avanched LIN 2.0 CRC and it checks out as correct according to my Lin capture device. But can mess around a bit with this.

[Marat]

[dimonlipko]

I work with LIN, and have the same problem. I think your problem was wrong ID, because in LIN can be protected ID, and check CRC. I try any Arduino Lin library and some have problem with it.