Is the break input on the zombieverter a 12v + input? I don't want to fry the input if it is suppose to be pulled to ground. Or is it a 12v+ analog input?
Bernie
1981 Porsche 928
Full Leaf Stack (2015)
ZV Break Input Pin 49
-
manny
- Posts: 195
- Joined: Sun Jan 23, 2022 4:15 pm
- Location: Netherlands
- Has thanked: 58 times
- Been thanked: 159 times
Re: ZV Break Input Pin 49
Yes it's a 12V input. So break is active when pin is at 12V.
[DRIVING] Citroen Saxo electrique
- Volvo ERAD motor, XC90 inverter/DCDC (custom OI board)
- PSA battery (50kWh)
- Foccci and MG ZS charger 6.6kW
- Zombie VCU