Diesel/Gasoline Heater...
I found some more diesel/gasoline heaters complete with everything for installation here... Seems to work OK on desk. I have to install it.
I will post feedback when i know more...
https://www.aliexpress.com/item/1005004 ... 1802Ioto29
EV car conversion hardware
-
zippy500
- Posts: 208
- Joined: Fri Jan 04, 2019 8:42 am
- Location: United Kingdom
- Has thanked: 69 times
- Been thanked: 3 times
Re: EV car conversion hardware
I'm converting a defender with a model 3 motor and volvo xc40 pack, I have a some parts left over from the xc40 which i am keen to know if they are useable
brake booster 32333276 i'm using a gen2 i booster in my build but i would like to know if this is useable to someone else
Also the OBC 32383807, keen to know if this is useable and if does anyone have the can database file for them.
brake booster 32333276 i'm using a gen2 i booster in my build but i would like to know if this is useable to someone else
Also the OBC 32383807, keen to know if this is useable and if does anyone have the can database file for them.
-
ianlighting
- Posts: 153
- Joined: Tue Apr 02, 2024 10:01 am
- Location: Uk
- Has thanked: 131 times
- Been thanked: 45 times
Re: EV car conversion hardware
Brake vacuum pump.
If anyone likes the MES/DEA 70/6E2 vacuum pump you can get new units from Jeremy Bloomfield at ‘EV Support’. There a very minimal single page website - http://www.ev-support.co.uk/ Apparently he sells other stuff like cables and connectors aswell, but you have to guess what’s available because nothing is listed.
There are much cheaper ways of doing brake vacuum because his new units are £200, but it’s new unused, includes the connector and he’s helpful.
This pump is a self contained unit. Just needs 12v and a 10mm pipe. It does the vacuum level sensing itself.
Product details here (from another unconnected site)
https://www.evcreate.com/wp-content/upl ... -70-6E.pdf
If anyone likes the MES/DEA 70/6E2 vacuum pump you can get new units from Jeremy Bloomfield at ‘EV Support’. There a very minimal single page website - http://www.ev-support.co.uk/ Apparently he sells other stuff like cables and connectors aswell, but you have to guess what’s available because nothing is listed.
There are much cheaper ways of doing brake vacuum because his new units are £200, but it’s new unused, includes the connector and he’s helpful.
This pump is a self contained unit. Just needs 12v and a 10mm pipe. It does the vacuum level sensing itself.
Product details here (from another unconnected site)
https://www.evcreate.com/wp-content/upl ... -70-6E.pdf