I can't seem to figure out how to delete the duplicate photos
Re: '63 VW Transporter - EM57 Powered.
Posted: Tue Mar 17, 2026 5:07 pm
by jerrykco
On another Subject.
We want to have the ability to fast charge for some of the longer VW club trips. Reading the wiki here: https://openinverter.org/wiki/Main_Page#Rapid_Charging
And reading this about ZV: https://openinverter.org/wiki/Chademo_with_Zombieverter
AND watching his video:
I see it's very straight forward.
However, in the USA the standard is NACS.
So has anyone done both Chademo and NACS for fast charging?
For context:
Motor: Leaf Stack 2015
Battery: 1/2 of a new Ionic 5 battery - 400V
BMS: Orion BMS 2
Re: '63 VW Transporter - EM57 Powered.
Posted: Tue Mar 17, 2026 7:04 pm
by Bratitude
being that NACS is just CCS with a different connector, foccci is what you are looking for.
Re: '63 VW Transporter - EM57 Powered.
Posted: Wed Apr 08, 2026 3:08 am
by jerrykco
Couple of updates
VW Transporter is at the metal stripper in Golden CO.
Should be getting it back soon.
Have been replacing the "small nut" transmission with a new freeway flyer trans mission with the "Big Nut" Reduction Gear axels.
And stripping them at home and painting them.
Also been working on the Front beam waiting on parts to rebuild the steering and king pins.
Lots to do.....
Re: '63 VW Transporter - EM57 Powered.
Posted: Thu Apr 09, 2026 9:46 pm
by jerrykco
More Progress: Got the transporter back from A1 Metal Stripping in Golden CO. Back in the shop.
Lots more to do. Also finished the trans axel. Waiting on Brake parts.
And the Freeway Flyer Transmission and the rebuilt BIG Nut RGB's.