openinverter forum

Well my part of the project is winding down. Between Dave and I we put over 1000 miles on the truck since it showed up at my shop. Dave got stranded the other week and I had to go rescue him. The ignition fuse I was using to power the Resolve-EV kept blowing on us, there was a dead short somewhere in the circuit. Think it may have to do with the clutch switch/relay so I just bypassed the circuit and wired the fuse directly to the Resolve-EV. Other than that it's just been driving fine.

I did a video about my concluding thoughts on the build and lessons learned. Check it out!