Power Designs Controller - opinion?
Power Designs Controller - opinion?
-< Mazda Eunos JC Cosmo rotary -> EV conversion w/ Lexus GS450H gear >-
Re: Power Designs Controller - opinion?
No-one heard of this or have an opinion?
-< Mazda Eunos JC Cosmo rotary -> EV conversion w/ Lexus GS450H gear >-
- johu
- Site Admin
- Posts: 5838
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 163 times
- Been thanked: 1059 times
- Contact:
Re: Power Designs Controller - opinion?
Never heard of it but it seems based on VESC: https://vesc-project.com/
Thats a quite popular project for ebikes. Apparently they scaled it up.
Thats a quite popular project for ebikes. Apparently they scaled it up.
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
- Posts: 10
- Joined: Wed Feb 27, 2019 12:44 am
- Location: Oregon, United States
- Has thanked: 11 times
- Been thanked: 2 times
Re: Power Designs Controller - opinion?
Arlin Sansome aka Arlo (endless sphere crx leaf inverter maker) is part of the team developing this.
https://www.youtube.com/user/garbizwal
https://www.youtube.com/user/garbizwal
Re: Power Designs Controller - opinion?
I did know some of the EV veterans had developed this as a commercial thing. Reading through the PDF doesn't mean a lot to me though.
Does it sound good?
Does it sound good?
-< Mazda Eunos JC Cosmo rotary -> EV conversion w/ Lexus GS450H gear >-
-
- Posts: 3280
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 239 times
- Contact:
Re: Power Designs Controller - opinion?
They are developing version that supports BLDC for now. There is support for commutation input.
ABZ and resolver interface is in development as well as IPM and ACIM motor support. They still dont have weakening.
It seems good all around inverter design. Software is widely used and adaptable etc...
I am not convinced though. I wont build any new power sections anymore. There is plenty of them in scrapyards. What we need are replacement brain modules the way of JackBauerss Prius/Lexus and JoHus Leaf inverter brain. And mine and TomDB Ampera/Volt contribution.
ABZ and resolver interface is in development as well as IPM and ACIM motor support. They still dont have weakening.
It seems good all around inverter design. Software is widely used and adaptable etc...
I am not convinced though. I wont build any new power sections anymore. There is plenty of them in scrapyards. What we need are replacement brain modules the way of JackBauerss Prius/Lexus and JoHus Leaf inverter brain. And mine and TomDB Ampera/Volt contribution.
Re: Power Designs Controller - opinion?
Thanks. That helps me understand
-< Mazda Eunos JC Cosmo rotary -> EV conversion w/ Lexus GS450H gear >-
-
- Posts: 3280
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 80 times
- Been thanked: 239 times
- Contact:
Re: Power Designs Controller - opinion?
I am being too critical maybe. So I offer the benefit of doubt If I could buy their control board and interface various automotive inverters with it.
Hm, wait I think there is a VESC brain design that supports isolated power stage. We could also try that...
Hm, wait I think there is a VESC brain design that supports isolated power stage. We could also try that...