Page 1 of 1
wanted: 2nd gen leaf inverter in UK
Posted: Thu May 13, 2021 12:39 pm
by janosch
Anyone got a spare one? Paid of course.
Re: wanted: 2nd gen leaf inverter in UK
Posted: Thu May 13, 2021 12:45 pm
by arber333
janosch wrote: ↑Thu May 13, 2021 12:39 pm
Anyone got a spare one? Paid of course.
I have seen one here... seems a good price.
https://rrr.lt/en/used-part/brz112163-2 ... r+inverter+
Re: wanted: 2nd gen leaf inverter in UK
Posted: Thu May 13, 2021 4:13 pm
by janosch
Nice. But isn't that a 1st gen one?
Re: wanted: 2nd gen leaf inverter in UK
Posted: Thu May 13, 2021 4:16 pm
by arber333
janosch wrote: ↑Thu May 13, 2021 4:13 pm
Nice. But isn't that a 1st gen one?
Hmm... It says 2013 there. I may be mistaken...
Re: wanted: 2nd gen leaf inverter in UK
Posted: Thu May 13, 2021 4:19 pm
by janosch
arber333 wrote: ↑Thu May 13, 2021 4:16 pm
janosch wrote: ↑Thu May 13, 2021 4:13 pm
Nice. But isn't that a 1st gen one?
Hmm... It says 2013 there. I may be mistaken...
It does say 2013, but I just browsed around a bit and it often says that Leafs are Diesel as well, so I wouldn't put money on the years being correct either
That site is a great resource though, they have a whole stack for 800 for example:
https://rrr.lt/en/used-part/adv29260-29 ... issan+leaf
Re: wanted: 2nd gen leaf inverter in UK
Posted: Thu May 13, 2021 6:46 pm
by SciroccoEV
It's a Gen1, no question. The cast top case with Nissan emblem gives it away.
Gen1 - no stack. Inverter is mounted on a subframe above the motor and connected via a short cable. HV box (inc DC/DC) is seperate and vertical behind motor/inverter. Charger is separate and at rear of vehicle.
Gen2 introduced the stack, Motor, Inverter, charger&DC/DC, HV box. Pressed steel top cover.
I have all three generations.
Re: wanted: 2nd gen leaf inverter in UK
Posted: Fri May 14, 2021 3:14 pm
by janosch
That supplier doesn't deliver to the UK anymore

Re: wanted: 2nd gen leaf inverter in UK
Posted: Sun May 16, 2021 8:02 pm
by omegon
i have a full stack from 2017 incl. Openinverter board.