Am I really this thick?
Posted: Fri Jun 18, 2021 2:38 pm
As some might know, I am working on designing a Leaf module charge protection board. I have "re-engineered" this thing using EasyEDA, LCSC & submitted to JLCPBB like 5 times.
EVERY time I submit a design for SMT assembly, JLCPCB finds a new "defect" that makes the production impossible. When I check the BOM, I find what that EasyEDA, LCSC and JLCPCB do not align nor match what was chosen. It seems like the descriptors all align, but the supplier (LCSC etc) and actual manufacturer numbers do not always align when JLC pulls them.
Frustrating
EVERY time I submit a design for SMT assembly, JLCPCB finds a new "defect" that makes the production impossible. When I check the BOM, I find what that EasyEDA, LCSC and JLCPCB do not align nor match what was chosen. It seems like the descriptors all align, but the supplier (LCSC etc) and actual manufacturer numbers do not always align when JLC pulls them.
Frustrating