openinverter forum

Hey Guys!
Was searching the threads here and couldnt find a answer to my question. Does anyone know if it it safe to run 108S on a Tesla large drive unit?
And can the evbmw controller board handle it?

Best regards!
/Joachim Westerlund

Should be fine, the igbts are rated for 600v. So 450v full charge leaves a bit of room for voltage spikes. With proper tuning to minimize voltage shoot through

The openinverter board doesn’t care what you run the power stage at.

great answer, thanks!

The LDU inverters DC-Link caps are only are rated for 450V so anything above that will be at your own peril.