Page 1 of 1
ISO: gen1 Ibooster conectors
Posted: Sun Dec 12, 2021 6:42 pm
by Bratitude
hey folks, im having trouble sourcing 1 of the pins for the ibooster connector:
1928498807 Bosch 4.8 BTC Terminal
dose any one have any extras or even the full gen1 ibooster harness?
for reference heres the part numbers i found. its just missing the plugs/ seals
ibooster gen1 connectors:
bosch
large conector: 1928405762
cover: 1928405765
pins: Bosch BTC Terminal
1928498807
1928498806
1928498705
TE
small connector: 1-967640-1
pins: 5-965906-5
Re: ISO: gen1 Ibooster conectors
Posted: Fri Dec 17, 2021 7:01 pm
by Ktulay
I've had a few customers use the iBooster on motor swaps due to clearance, and have since put together a connector kit for them rather than have them pay international shipping from The Netherlands. We have a few in stock at the moment. Located in the US. Website isn't finished yet and no international shipping is activated on there yet but I could create the shipment manually.
https://tulayswirewerks.com/product/bos ... ector-kit/
Re: ISO: gen1 Ibooster conectors
Posted: Fri Dec 17, 2021 9:45 pm
by Bratitude
Ktulay wrote: ↑Fri Dec 17, 2021 7:01 pm
I've had a few customers use the iBooster on motor swaps due to clearance, and have since put together a connector kit for them rather than have them pay international shipping from The Netherlands. We have a few in stock at the moment. Located in the US. Website isn't finished yet and no international shipping is activated on there yet but I could create the shipment manually.
https://tulayswirewerks.com/product/bos ... ector-kit/
PM’d you
Awesome, I’m guess pricing is in USD?
Re: ISO: gen1 Ibooster conectors
Posted: Mon Dec 20, 2021 3:01 pm
by Ktulay
Bratitude wrote: ↑Fri Dec 17, 2021 9:45 pm
PM’d you
Awesome, I’m guess pricing is in USD?
Yes. We're in the US (Pennsylvania) so all prices are USD. I just started building the website so no international shipping methods are setup. I do plan to offer to accept some crypto payments in the future too.
Will get to your PM next.
Re: ISO: gen1 Ibooster conectors
Posted: Wed Dec 22, 2021 9:08 pm
by larsrengersen
Hi @Ktulay of course you can sell connector kits too, but I have spend a lot of time creating and sharing all the iBooster information and to me it is not OK to copy images from my website from
https://www.evcreate.nl/wiring-the-tesla-ibooster/ and put your logo onto it without referring to me/EVcreate.
Please add appropriate attribution.