4 Channel BMS system for sale
Posted: Wed May 25, 2022 5:07 pm
Switching out my BMS system so have the 4 cell daisy chain BMS system left over. Would rather someone else make use of it than it gather dust on my shelf.
It consists of:
24 slave boards
1 master board complete with enclosure and connectors
1 master board missing stm32 and a power supply switch.
Cell taps for 84 cells.
It currently does run just fine. There is some jitter on the cell voltage readings so they fluctuate around 10mV up and down. Software is now all open source but I lack the skills to develop it any further. Would work just fine for stationary storage, which would be my intended use for it if I kept it. But I already have too many projects.
Cost me around £500 to get to this point. Looking for £300. Can ship to the UK for free. Rest of the world is probably possible. All proceeds will go back into playing with HV in cars.
It consists of:
24 slave boards
1 master board complete with enclosure and connectors
1 master board missing stm32 and a power supply switch.
Cell taps for 84 cells.
It currently does run just fine. There is some jitter on the cell voltage readings so they fluctuate around 10mV up and down. Software is now all open source but I lack the skills to develop it any further. Would work just fine for stationary storage, which would be my intended use for it if I kept it. But I already have too many projects.
Cost me around £500 to get to this point. Looking for £300. Can ship to the UK for free. Rest of the world is probably possible. All proceeds will go back into playing with HV in cars.