Inverter Firmware v4.10.R
Posted: Wed Jan 16, 2019 8:33 pm
- Better support for high pulse count single channel encoders (contributed by Nail Güzel)
- Displaying last error in spot value channel (that also makes it possible to send it via CAN)
- Added error code when AC current limit kicks in
- Added experimental (!) AC_HEAT mode. It is supposed to heat the battery pack by cycling current between two pack halfes. UNTESTED!!
- Added possibility to hide parameters (flag hidden) or unhide them (flag !hidden). The flags are stored alongside the parameter values with the "save" command