openinverter forum

Hi all
I've got a video going up on YouTube showing how I used the SME or safety box from the i3 for my precharge circuit.
Probably the easiest thing I've done so far, stripped out some wires and boards, put in a timer delay and Bobs your uncle

Here it is

I found this quite easy, and I am rubbish at this stuff, I can recommend using the i3 some for your pre charge circuit

Scott166 wrote: ↑Sun Nov 27, 2022 12:03 am
I found this quite easy, and I am rubbish at this stuff, I can recommend using the i3 some for your pre charge circuit

Can you share the P/N of the box?

tnx

There seems to be a few different options....