Page 1 of 1
3D Printed Charging Plugs and Sockets
Posted: Mon Oct 28, 2019 1:05 pm
by Jack Bauer
This seller has a selection of 3D printed type 2 plugs and sockets. I am using them myself and can attest to the quality.
https://www.ebay.co.uk/itm/123688115268
Re: 3D Printed Charging Plugs and Sockets
Posted: Mon Oct 28, 2019 3:39 pm
by arber333
Yes i have his short male plug. It tested ok, but i am sceptical about iron pins. I suggested him to make brass pins for high power plugs.
And of course MOT inspector would give me hell if there would be no CE mark on the socket.
Re: 3D Printed Charging Plugs and Sockets
Posted: Mon Nov 11, 2019 5:56 pm
by mfox
Tnx Damien for post
Im doing brass pins now
Re: 3D Printed Charging Plugs and Sockets
Posted: Tue Feb 18, 2020 8:53 pm
by mfox
this is my current EV
Re: 3D Printed Charging Plugs and Sockets
Posted: Wed Feb 19, 2020 1:24 am
by xp677
arber333 wrote: ↑Mon Oct 28, 2019 3:39 pm
And of course MOT inspector would give me hell if there would be no CE mark on the socket.
Easy to add a CE mark....Croatia Export
