openinverter forum

I planned to use them in my Impreza-Build but unfortunately i had to change plans as regulations in Germany changed last year. So up for sale are my custom made cooling plates.

All plates are pressure checked and flow checked!

short Plate is 39€ plus shipping.
long plate is 49€ plus shipping.
discount if you take more than one.
Shipping worldwide possible

Plate 1 = 92cm long, 35cm with

Plate 2 and 3 (i have this two times). Slightly shortened Plate = 35cm width and 92cm long

Plate 4: Untampered original Plate = 97cm long and 35cm width

Cooling Plates 5, 6, 7, and 8 (four are available)= 53,5cm long and 35cm width

Hello,
what type of battery modules were planned to be used with these plates?

And just for my curiosity: what changes were made in the legislation? Why do you have to give up?
(I want to convert a Peugeot 406 Coupe, here in Hungary, but the legal background is a nightmare since many-many years, and my "secret-plan" was, that I get a TÜV for that in Germany, and then import it to Hungary)
thanks,
Norbert

Hello

Could you gave us the following measurements ? Thickness of the plate (one side seems deeper) ? Distance between the 2 hoses ? Shipping to France ?

Cheers.

Sorry everyone - i forgot to turn on notifications for this topic!

The thickness is 12mm, measurement between the 2 hoses i can tell you tomorrow

The cooling plates came of a hyundai Kona

Changes where that front distance to HV parts has to be 500, sides 200 and rear 300mm