Page 1 of 1

Zombieverter board for sale - beta version

Posted: Mon Sep 04, 2023 2:05 pm
by johnfin
Hi all,

I have one of the first 10 boards that Damien produced which were sold to some Patreon members for evaluation before the V1 was released. They were first described here.

Unfortunately I had a change of circumstances shortly afterwards and was never able to put it into use.

There was an incorrect component on this first batch installed by the board supplier, which just needs swapping out for the correct one. This is discussed here and here.

You'll get exactly what I received from Damien in the pictures attached (front, back, wifi board) and the support thread and development thread above will be your friend.

£150 £100/offers? (the V1 release version is €350 or €750 fully built)
I will also email Damien just in case he has any interest in repurposing it.

IMG_9176.jpeg
IMG_9177.jpeg
IMG_9178.jpeg
John

Re: Zombieverter board for sale - BETA VERSION

Posted: Mon Sep 04, 2023 3:37 pm
by Jacobsmess
I'm interested but will need to educate myself first on its issues

Re: Zombieverter board for sale - BETA VERSION

Posted: Tue Sep 05, 2023 11:19 am
by johnfin
No problem, I don’t think it’s any significant hurdle in the scheme of things, but I just didn’t get far into it myself.

Re: Zombieverter board for sale - BETA VERSION

Posted: Fri Sep 15, 2023 9:06 am
by johnfin
Happy to hear offers on this from anyone. I have no use for it any time soon and it just needs a new home.

Re: Zombieverter board for sale - beta version

Posted: Fri Sep 15, 2023 10:27 am
by Jacobsmess
Messaged you

Re: Zombieverter board for sale - beta version

Posted: Mon Sep 25, 2023 3:44 pm
by xrotaryguy
Damien notes in his youtube videos that you need to solder on a component anyway. Is this "beta issue" is the same as the rest of the boards that got sold?

Re: Zombieverter board for sale - beta version

Posted: Wed Sep 27, 2023 8:35 am
by johnfin
Yes, they all needed some extra elements soldering. It's just that this one needed something replacing too as there was an error by the supplier. So all doable, just needs a little more manual intervention than the final product.

Re: Zombieverter board for sale - beta version

Posted: Tue Oct 03, 2023 4:41 am
by j2digital
I may also be interested if those above decide not to buy! I too am pretty new but not super afraid of having to solder something. Not sure what shipping to the US would cost though.

Re: Zombieverter board for sale - beta version

Posted: Tue Oct 03, 2023 12:47 pm
by johnfin
If you want to send me an address or I guess at least a zipcode then I'm happy to have a look for you?

Re: Zombieverter board for sale - beta version

Posted: Wed Oct 04, 2023 7:07 pm
by j2digital
I just sent a PM!

Re: Zombieverter board for sale - beta version

Posted: Thu Oct 05, 2023 8:13 am
by celeron55
That's got the GigaDevices microcontroller also. You will want to swap that out for a proper stm32.

Re: Zombieverter board for sale - beta version

Posted: Wed Oct 11, 2023 5:16 pm
by bigmotherwhale
Is this still up for grabs?

Re: Zombieverter board for sale - beta version

Posted: Thu Oct 12, 2023 5:26 pm
by Jacobsmess
Hi John, I've messaged you about the payment I sent you, can you please respond when you get a moment thanks.