openinverter forum

Posted: **Tue Sep 24, 2024 5:35 pm**

Hi, I wanted to charge it and apparently the VCU is interfering with the charging, as soon as I unplug the VCU, it can be charged again without any problems, I installed the Tesla gen2 OBC.
I've added the parameters of the VCU and the charger, a CAN log is also included
In the Orion BMS2 is chademo aktivatet

teslaG2_param.json: (220 Bytes) Downloaded 86 times

vcu_param.json: (1.96 KiB) Downloaded 94 times

withVCU.csv: (1.7 MiB) Downloaded 92 times

withoutVCU.csv: (3.91 MiB) Downloaded 95 times

Posted: **Wed Sep 25, 2024 1:58 pm**

Have you tried putting your charger onto a different CANbus?

openinverter forum

Charging with VCU isn´t possible

Charging with VCU isn´t possible

Re: Charging with VCU isn´t possible