Page 1 of 1

Disassembling the inverter honda accord

Posted: Mon Dec 02, 2024 2:14 pm
by Ryclanmoto
Good afternoon, I'm I'm a newbie here, maybe someone will find the information on the inverter useful Honda Accord and its disassembly

Re: Disassembling the inverter honda accord

Posted: Mon Dec 02, 2024 2:22 pm
by Ryclanmoto
IMG20240629132755.jpg
IMG20240629134637.jpg
.
IMG20240629134641.jpg
IMG20240629132759.jpg
IMG20240629135950.jpg
IMG20240629140146.jpg
IMG20240629140155.jpg

Re: Disassembling the inverter honda accord

Posted: Mon Dec 02, 2024 7:03 pm
by johu
Cool, another Honda, so not this one? viewtopic.php?t=3545

Re: Disassembling the inverter honda accord

Posted: Tue Dec 03, 2024 10:05 am
by Ryclanmoto
johu wrote: Mon Dec 02, 2024 7:03 pm Cool, another Honda, so not this one? viewtopic.php?t=3545
No, this is a Honda Accord inverter, another author has a Honda Civic inverter, But I have an inverter from a Honda Civic, Insight (Jazz and Fit), Honda Accord inverter current sensors have a power supply of 4.90Volt

Re: Disassembling the inverter honda accord

Posted: Tue Dec 03, 2024 11:16 am
by Ryclanmoto
IMG_20241203_200450.jpg
The current sensor has a pinout
Green ,Gray, pink - Signal output
White, blue, light green GND
Red, yellow, Brown VCC
I marked them in the
IMG20241210221407.jpg
IMG20241210221451.jpg
IMG20241210221503.jpg
Current sensor from inside]

Re: Disassembling the inverter honda accord

Posted: Tue Dec 03, 2024 11:56 pm
by hurricos
It's also this one: viewtopic.php?p=25763#p25763

Based on the silkscreen, OP also has a 2014-2018? HAH inverter, which is Honda's first generation PCU, documented in some depth here: https://git.laboratoryb.org/hurricos/Cl ... System.pdf

Re: Disassembling the inverter honda accord

Posted: Sun Feb 09, 2025 9:37 am
by Ryclanmoto
hurricos wrote: Tue Dec 03, 2024 11:56 pm It's also this one: viewtopic.php?p=25763#p25763

Based on the silkscreen, OP also has a 2014-2018? HAH inverter, which is Honda's first generation PCU, documented in some depth here: https://git.laboratoryb.org/hurricos/Cl ... System.pdf

I wonder where I can find the marking of the PWM signals on it.