openinverter forum

Posted: **Wed Mar 12, 2025 8:56 pm**

Is it normal that the ldu inverter stays in run mode, even if errors are present

Posted: **Thu Mar 13, 2025 6:02 am**

I suppose the inverter was restarted after it tripped? Lasterr isn't reset then

Posted: **Thu Mar 13, 2025 8:29 am**

The LDU is started via the VCU, this happens with every start, in the VCU at the spot values it is shown that it is off, but in the LDU it is still set to Run, at least here on the desk

openinverter forum

inverter stays in run mode, even if errors are present

inverter stays in run mode, even if errors are present

Re: inverter stays in run mode, even if errors are present

Re: inverter stays in run mode, even if errors are present