openinverter forum

I have not been able to find the layout files for the "nissan leaf adapter board" in any of the Github accounts I have located.
JOHU's github account has a lot of layouts, but as for the adapter there is no schematic or board files there.
There are two .fpc files related to the adapter board, but my CAD (Orcad allegro) has not been able to translate them at all.

I have also checked Damiens github account with no success.

One other question:

I have a gen 2 Leaf drivetrain with the 6.6KW PDU.
I intend to use this adapter board in that inverter.

Which inverter control board is the latest that will install in the Nissan Leaf Adapter Board?

Mark
Oregon

It was done in FreePCB: https://www.freepcb.com/

I can restock the board in my shop if there is sufficient interest

Thanks, I know you are busy and appreciate the reply. I will download Freecad and have a look.

Mark

Europa46 wrote: ↑Tue Oct 07, 2025 4:56 pm Thanks, I know you are busy and appreciate the reply. I will download Freecad and have a look.

Mark

freepcb not freecad.

Yes, FreePCB. Downloaded FreePCB, got working with tutorial.
Downloaded latest v1359 update files. installed.
Opened Leaf adaptor board .dsn successfully
Thanks again.