Page 1 of 1

Looking for Ldu inverter for replacement

Posted: Tue Oct 14, 2025 6:52 am
by joeflickers
Unfortunately my Ldu blew up, water penetrated after a heavy rainfall, did diode test and one of my phase drivers has blown mosfets.. I could repair the unit but I'm skeptical and want to replace it.. Wonder if someone has a torn down good inverter.

Re: Looking for Ldu inverter for replacement

Posted: Tue Oct 14, 2025 10:08 am
by P.S.Mangelsdorf
Base or Sport? And what country are you in?

Re: Looking for Ldu inverter for replacement

Posted: Tue Oct 14, 2025 10:39 am
by joeflickers
P.S.Mangelsdorf wrote: Tue Oct 14, 2025 10:08 am Base or Sport? And what country are you in?
Sport version
Nairobi, Kenya

Re: Looking for Ldu inverter for replacement

Posted: Tue Oct 14, 2025 2:16 pm
by P.S.Mangelsdorf
joeflickers wrote: Tue Oct 14, 2025 10:39 am
I don't have any spare Sport phases, sorry.

Re: Looking for Ldu inverter for replacement

Posted: Tue Oct 14, 2025 7:48 pm
by hanskraayeveld
We have a lot of spare parts, base, sport...

1 phase or whole inverter?

Repairing is possible, but mosfet mid under is diffecult/hard to replace.

Re: Looking for Ldu inverter for replacement

Posted: Wed Oct 15, 2025 6:41 am
by joeflickers
P.S.Mangelsdorf wrote: Tue Oct 14, 2025 2:16 pm I don't have any spare Sport phases, sorry.
thanks for the response

Re: Looking for Ldu inverter for replacement

Posted: Wed Oct 15, 2025 6:46 am
by joeflickers
hanskraayeveld wrote: Tue Oct 14, 2025 7:48 pm We have a lot of spare parts, base, sport...

1 phase or whole inverter?

Repairing is possible, but mosfet mid under is diffecult/hard to replace.
good, Idd like to replace the whole inverter, I was attempting to do repair but it's a lot of work de-soldering the IGBTS,seems it one phase that is fried.

edit johu fixed your quotes ;)

Re: Looking for Ldu inverter for replacement

Posted: Fri Oct 17, 2025 4:48 am
by joeflickers
joeflickers wrote: Wed Oct 15, 2025 6:46 am good, Idd like to replace the whole inverter, I was attempting to do repair but it's a lot of work de-soldering the IGBTS,seems it one phase that is fried.

edit johu fixed your quotes ;)
Hi, any feedback on this?