Page 1 of 1
Wanted - VDA355 12S1P Modules
Posted: Mon Jan 26, 2026 1:17 pm
by pickmeup
Hi All
I'm after some ( 8 preferably ) VDA355 modules that ZeroEV / Fellten used to sell, but they no longer stock them.
Pic should be below of what they look like, with the terminals at the same end.
- VDA355 Module
Does anyone have any about, I can get away with 3 but ideally I need 8 to make up a new system.
Any help appreciated.
Cheers
Gaz
Re: Wanted - VDA355 12S1P Modules
Posted: Mon Jan 26, 2026 1:51 pm
by tom91
Any clue what vehicles these where fitted in?
What you building with them?
Re: Wanted - VDA355 12S1P Modules
Posted: Tue Jan 27, 2026 8:56 am
by pickmeup
its another mini tom, we dont have enough of the old modules left and the design has changed to move the terminals to either end.
Re: Wanted - VDA355 12S1P Modules
Posted: Tue Jan 27, 2026 9:09 am
by tom91
Any idea which cars had similar modules? That will help narrow down a source.
Re: Wanted - VDA355 12S1P Modules
Posted: Tue Jan 27, 2026 12:10 pm
by jrbe
Currently says they have 29 in stock,
https://shop.fellten.com/shop/dfd24kwh6 ... -kwh-18388
And it would be great to
start a update the wiki page with these vda module sizes and which vehicles have them.
https://openinverter.org/wiki/Batteries#OEM_modules
Re: Wanted - VDA355 12S1P Modules
Posted: Thu Jan 29, 2026 9:35 pm
by pickmeup
thats the 6s2p module, i need the 12S1P module
not sure what vehicles they are used in, but we cant source them new now.