Nissan leaf motor couplers and adapter plates - Revision history

Bratitude at 03:12, 9 February 2025

2025-02-09T03:12:11Z

← Older revision		Revision as of 03:12, 9 February 2025
Line 1:		Line 1:
			[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]
	=== adapter plates ===		=== adapter plates ===
	~~[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]~~
	~~[[File:Leaf coupler.jpg\|thumb\|motor coupler and adapter plate on a em57 motor]]~~
	~~adapter plate for the [[Em57\|em57 motor]] cad files:~~

	~~https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT~~


	~~available for purchase~~: https://bratindustries.net/product/~~em57~~-adapter-plate/		* [https://bratindustries.net/product/em57-adapter-plate/ em57 adapter plate]
			* [https://bratindustries.net/product/gen-1-nissan-leaf-em61-motor-adapter-plate/ em61 adapter plate]

			* [https://github.com/angusjo/adapter-plate em57 cad files]

	~~the adapter plate is designed for the [[Em57\|em57 motor(gen 2+)]], and utilizes all the locating dowel pins.~~

	the design uses a 1in thick piece of aluminum, milled down slightly for ensure a square and accurate fit. there is a bearing boar in the design, which utilizes the ---- angular contact bearing for alternative setups where there may be axial loads on the motor shaft. the bearings in the leaf motor are not designed for ~~these types of forces,~~ and ~~will fail, so the need for a support bearing is paramount.~~		<nowiki>*</nowiki>the bearings in the leaf motor are not designed for axial loads introduced from a clutch and flywheel

	a support bearing isnt required if the motor is just directly mated to another gearbox.		a support bearing isnt required if the motor is just directly mated to another gearbox.
Line 20:		Line 16:

	=== motor couplers ===		=== motor couplers ===
	~~motor couplers available via~~ https://bratindustries.net/product/nissan-leaf-motor-coupler/ [[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]
			* [https://bratindustries.net/product/nissan-leaf-motor-coupler-2/ motor couplers]

			[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569
	[[Category:Nissan]] [[Category:Conversions]] [[Category:Mechanical]]		[[Category:Nissan]] [[Category:Conversions]] [[Category:Mechanical]]

Tom91: Categories

2024-12-20T16:52:28Z

Marcexec at 10:18, 14 June 2023

2023-06-14T10:18:38Z

← Older revision		Revision as of 10:18, 14 June 2023
Line 22:		Line 22:
	motor couplers available via https://bratindustries.net/product/nissan-leaf-motor-coupler/ [[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]		motor couplers available via https://bratindustries.net/product/nissan-leaf-motor-coupler/ [[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569
			[[Category:OEM]] [[Category:Nissan]] [[Category:Conversions]] [[Category:Mechanical]]

Bratitude: /* adapter plates */

2022-05-11T19:27:38Z

adapter plates

← Older revision		Revision as of 19:27, 11 May 2022
Line 6:		Line 6:
	https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT		https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT

	the adapter plate is designed for the [[Em57\|em57 motor]], and utilizes all the locating ~~dowls~~.
			available for purchase: https://bratindustries.net/product/em57-adapter-plate/


			the adapter plate is designed for the [[Em57\|em57 motor(gen 2+)]], and utilizes all the locating dowel pins.

	the design uses a 1in thick piece of aluminum, milled down slightly for ensure a square and accurate fit. there is a bearing boar in the design, which utilizes the ---- angular contact bearing for alternative setups where there may be axial loads on the motor shaft. the bearings in the leaf motor are not designed for these types of forces, and will fail, so the need for a support bearing is paramount.		the design uses a 1in thick piece of aluminum, milled down slightly for ensure a square and accurate fit. there is a bearing boar in the design, which utilizes the ---- angular contact bearing for alternative setups where there may be axial loads on the motor shaft. the bearings in the leaf motor are not designed for these types of forces, and will fail, so the need for a support bearing is paramount.
Line 16:		Line 20:

	=== motor couplers ===		=== motor couplers ===
	motor ~~shaft coupler for gen1~~/2/3 leaf ~~(em61 and em57 motors) are for sale via brat industries:~~		motor couplers available via https://bratindustries.net/product/nissan-leaf-motor-coupler/ [[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]

	~~contact him via email:~~

	~~angusjohnson@protonmail.com~~
	[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569

Bratitude: /* adapter plates */

2021-10-10T01:15:42Z

adapter plates

← Older revision		Revision as of 01:15, 10 October 2021
Line 2:		Line 2:
	[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]		[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]
	[[File:Leaf coupler.jpg\|thumb\|motor coupler and adapter plate on a em57 motor]]		[[File:Leaf coupler.jpg\|thumb\|motor coupler and adapter plate on a em57 motor]]
	adapter plate for the em57 motor cad files:		adapter plate for the [[Em57\|em57 motor]] cad files:

	https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT		https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT

	the adapter plate is designed for the em57 motor, and utilizes all the locating dowls.		the adapter plate is designed for the [[Em57\|em57 motor]], and utilizes all the locating dowls.

	the design uses a 1in thick piece of aluminum, milled down slightly for ensure a square and accurate fit. there is a bearing boar in the design, which utilizes the ---- angular contact bearing for alternative setups where there may be axial loads on the motor shaft. the bearings in the leaf motor are not designed for these types of forces, and will fail, so the need for a support bearing is paramount.		the design uses a 1in thick piece of aluminum, milled down slightly for ensure a square and accurate fit. there is a bearing boar in the design, which utilizes the ---- angular contact bearing for alternative setups where there may be axial loads on the motor shaft. the bearings in the leaf motor are not designed for these types of forces, and will fail, so the need for a support bearing is paramount.

Bratitude at 22:29, 9 October 2021

2021-10-09T22:29:20Z

← Older revision		Revision as of 22:29, 9 October 2021
Line 1:		Line 1:
			=== adapter plates ===
	[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]		[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]
	[[File:Leaf coupler.jpg\|thumb\|motor coupler and adapter plate on a em57 motor]]		[[File:Leaf coupler.jpg\|thumb\|motor coupler and adapter plate on a em57 motor]]
Line 5:		Line 6:
	https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT		https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT

			the adapter plate is designed for the em57 motor, and utilizes all the locating dowls.

			the design uses a 1in thick piece of aluminum, milled down slightly for ensure a square and accurate fit. there is a bearing boar in the design, which utilizes the ---- angular contact bearing for alternative setups where there may be axial loads on the motor shaft. the bearings in the leaf motor are not designed for these types of forces, and will fail, so the need for a support bearing is paramount.

			a support bearing isnt required if the motor is just directly mated to another gearbox.


			<nowiki>*</nowiki>refer to the drawing of the adapter plate when machining, and not the cad file, to ensure the machine is following accurate data

			=== motor couplers ===
	motor shaft coupler for gen1/2/3 leaf (em61 and em57 motors) are for sale via brat industries:		motor shaft coupler for gen1/2/3 leaf (em61 and em57 motors) are for sale via brat industries:

Bratitude at 22:19, 9 October 2021

2021-10-09T22:19:18Z

← Older revision		Revision as of 22:19, 9 October 2021
Line 12:		Line 12:

	angusjohnson@protonmail.com		angusjohnson@protonmail.com
	[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb]]		[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569

Bratitude at 22:18, 9 October 2021

2021-10-09T22:18:37Z

← Older revision		Revision as of 22:18, 9 October 2021
Line 1:		Line 1:
	[[File:Adapter plate.jpg\|thumb]]		[[File:Adapter plate.jpg\|thumb\|cnc machined aluminum adapter plate for em57 motor]]
	[[File:Leaf coupler.jpg\|thumb]]		[[File:Leaf coupler.jpg\|thumb\|motor coupler and adapter plate on a em57 motor]]
	adapter plate for the em57 motor		adapter plate for the em57 motor cad files:

	https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT		https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT


	motor shaft coupler for gen1/2/3 leaf (em61 and em57 motors) ~~available by contacting~~ brat industries: angusjohnson@protonmail.com
			motor shaft coupler for gen1/2/3 leaf (em61 and em57 motors) are for sale via brat industries:

			contact him via email:

			angusjohnson@protonmail.com
	[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb]]		[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569

Bratitude at 22:16, 9 October 2021

2021-10-09T22:16:41Z

← Older revision		Revision as of 22:16, 9 October 2021
Line 1:		Line 1:
	[[File:Adapter plate.jpg\|thumb]]		[[File:Adapter plate.jpg\|thumb]]
			[[File:Leaf coupler.jpg\|thumb]]
	adapter plate for the em57 motor		adapter plate for the em57 motor

Line 8:		Line 9:
	[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb]]		[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569
	~~[[File:Adapter plate CAD .jpg\|thumb]]~~

Bratitude at 22:15, 9 October 2021

2021-10-09T22:15:41Z

← Older revision		Revision as of 22:15, 9 October 2021
Line 3:		Line 3:

	https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT		https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT


			motor shaft coupler for gen1/2/3 leaf (em61 and em57 motors) available by contacting brat industries: angusjohnson@protonmail.com
			[[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb]]
			https://openinverter.org/forum/viewtopic.php?f=12&t=569
	[[File:Adapter plate CAD .jpg\|thumb]]		[[File:Adapter plate CAD .jpg\|thumb]]

← Older revision		Revision as of 16:52, 20 December 2024
Line 22:		Line 22:
	motor couplers available via https://bratindustries.net/product/nissan-leaf-motor-coupler/ [[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]		motor couplers available via https://bratindustries.net/product/nissan-leaf-motor-coupler/ [[File:0010-000-004 R00 LEAF COUPLER.jpg\|thumb\|motor coupler drawing]]
	https://openinverter.org/forum/viewtopic.php?f=12&t=569		https://openinverter.org/forum/viewtopic.php?f=12&t=569
	~~[[Category:OEM]]~~ [[Category:Nissan]] [[Category:Conversions]] [[Category:Mechanical]]		[[Category:Nissan]] [[Category:Conversions]] [[Category:Mechanical]]