Toyota Prius Gen3 Board - Revision history

Eagle411: /* First Run (PWM verify) */

2026-03-13T21:28:02Z

First Run (PWM verify)

← Older revision		Revision as of 21:28, 13 March 2026
Line 442:		Line 442:
	Navigate to the [[Web Interface]]		Navigate to the [[Web Interface]]

	Change the parameter encmode to 'AB' as at the moment we don't have any sensors connected. Set udcmin to 0 to disable precharge.		Change the parameter encmode to 'AB' as at the moment we don't have any sensors connected.

			Set udcmin to 0 to disable precharge.

			Set udcsw to 0 so you won't get the Pre-charge fault.

	Start the inverter in manual mode with the button		Start the inverter in manual mode with the button

Eagle411: /* Ampseal Socket & Plug */

2026-02-27T01:32:29Z

Ampseal Socket & Plug

← Older revision		Revision as of 01:32, 27 February 2026
Line 805:		Line 805:
	There are multiple part numbers for the large 35 way Ampseal through hole socket, with small mating differences, be sure to get a matching pair.		There are multiple part numbers for the large 35 way Ampseal through hole socket, with small mating differences, be sure to get a matching pair.

	TE connectivity '''776164-1''' and '''776163-1''' are a matched ~~pair~~<ref>https://www.ebay.co.uk/itm/Connector-ECU-Terminals-35P-35-Way-776164-1-776231-1-776163-1-Male-Female-Pins/401764868163?hash=item5d8b0d6043:g:3TkAAOSwexhc1Tcy (Backup: [https://web.archive.org/web/20221016161951/https://www.ebay.co.uk/itm/Connector-ECU-Terminals-35P-35-Way-776164-1-776231-1-776163-1-Male-Female-Pins/401764868163 Web Archive])</ref>.		TE connectivity '''776164-1''' (female) and '''776163-1 / 776231-1''' are a matched pairs<ref>https://www.ebay.co.uk/itm/Connector-ECU-Terminals-35P-35-Way-776164-1-776231-1-776163-1-Male-Female-Pins/401764868163?hash=item5d8b0d6043:g:3TkAAOSwexhc1Tcy (Backup: [https://web.archive.org/web/20221016161951/https://www.ebay.co.uk/itm/Connector-ECU-Terminals-35P-35-Way-776164-1-776231-1-776163-1-Male-Female-Pins/401764868163 Web Archive])</ref>. 776231-1 is the vertical header he uses in the video.

	[[File:AMPSeal socket (male).jpg\|alt=\|none\|thumb\|AMPSeal socket (male) in 3D printed surround with pins marked]]		[[File:AMPSeal socket (male).jpg\|alt=\|none\|thumb\|AMPSeal socket (male) in 3D printed surround with pins marked]]

Eagle411: /* Inverter Model Numbers */

2026-01-18T01:16:40Z

Inverter Model Numbers

← Older revision		Revision as of 01:16, 18 January 2026
Line 64:		Line 64:
	\| G9200-33171 \|\| Camry (RHD, unknown year) \|\| \|\| \|\| \|\| \|\| \|\|		\| G9200-33171 \|\| Camry (RHD, unknown year) \|\| \|\| \|\| \|\| \|\| \|\|
	\|-		\|-
	\| G9200-47141 \|\| Auris 2012, <br/>Prius 2011 \|\| \|\| \|\| \|\| \|\| \|\|		\| G9200-47141 \|\| Auris 2012, <br/>Prius 2011 \|\| F1759-47041 01\|\| \|\| \|\| \|\| \|\| https://openinverter.org/forum/viewtopic.php?t=6895
	\|-		\|-
	\|G9200-47140		\|G9200-47140

Eagle411: /* Inverter Model Numbers */

2026-01-18T00:40:53Z

Inverter Model Numbers

← Older revision		Revision as of 00:40, 18 January 2026
Line 64:		Line 64:
	\| G9200-33171 \|\| Camry (RHD, unknown year) \|\| \|\| \|\| \|\| \|\| \|\|		\| G9200-33171 \|\| Camry (RHD, unknown year) \|\| \|\| \|\| \|\| \|\| \|\|
	\|-		\|-
	\| G9200-47141 \|\| Auris 2012, ~~RHD~~<br/>Prius ~~(RHD, unknown year, Gen3)~~ \|\| \|\| \|\| \|\| \|\| \|\|		\| G9200-47141 \|\| Auris 2012, <br/>Prius 2011 \|\| \|\| \|\| \|\| \|\| \|\|
	\|-		\|-
	\|G9200-47140		\|G9200-47140

Tom91: Categories

2024-12-20T17:43:10Z

Bigpie: Adding source for the white header

2023-09-18T13:04:54Z

Adding source for the white header

← Older revision		Revision as of 13:04, 18 September 2023
Line 233:		Line 233:
	Also easiest is to start with this connector, whilst the most complicated, starting with an unpopulated board allows easier access to it as the following connectors are largely around this one.		Also easiest is to start with this connector, whilst the most complicated, starting with an unpopulated board allows easier access to it as the following connectors are largely around this one.
	[[File:20200619 175629.jpg\|none\|thumb]]		[[File:20200619 175629.jpg\|none\|thumb]]

			This connector is available on [https://www.aliexpress.com/item/4001293423321.html AliExpress https://www.aliexpress.com/item/4001293423321.html] if you need additional connectors.

Lukes: added pictures of 3d printed part locations

2023-05-31T20:03:53Z

added pictures of 3d printed part locations

← Older revision		Revision as of 20:03, 31 May 2023
Line 989:		Line 989:
	User bobby_come_lately has created a fair few 3D printable parts for use with the inverter. They can be downloaded https://github.com/jamiejones85/Gen3PriusInverter3DParts		User bobby_come_lately has created a fair few 3D printable parts for use with the inverter. They can be downloaded https://github.com/jamiejones85/Gen3PriusInverter3DParts

	More information on these parts~~, such as where to install them and how they fit together,~~ can be found in this forum post https://openinverter.org/forum/viewtopic.php?t=836		More information on these parts can be found in this forum post https://openinverter.org/forum/viewtopic.php?t=836

			=== 3D Printed Part Locations ===
			[[File:3dprint locations1.jpg\|none\|thumb\|Left side]]
			[[File:3dprint locations3.jpg\|none\|thumb\|Right side]]
			[[File:3dprint locations2.jpg\|none\|thumb\|Front]]

	== Frequently Asked Questions ==		== Frequently Asked Questions ==

Lukes: Added link to 3D Printed Parts thread in the forums

2023-05-23T04:47:43Z

Added link to 3D Printed Parts thread in the forums

← Older revision		Revision as of 04:47, 23 May 2023
Line 988:		Line 988:
	\|}		\|}
	User bobby_come_lately has created a fair few 3D printable parts for use with the inverter. They can be downloaded https://github.com/jamiejones85/Gen3PriusInverter3DParts		User bobby_come_lately has created a fair few 3D printable parts for use with the inverter. They can be downloaded https://github.com/jamiejones85/Gen3PriusInverter3DParts

			More information on these parts, such as where to install them and how they fit together, can be found in this forum post https://openinverter.org/forum/viewtopic.php?t=836

	== Frequently Asked Questions ==		== Frequently Asked Questions ==

Ember: grammatical error

2023-03-17T02:53:33Z

grammatical error

← Older revision		Revision as of 02:53, 17 March 2023
Line 368:		Line 368:
	The main firmware can be found here: https://github.com/jsphuebner/stm32-sine/releases		The main firmware can be found here: https://github.com/jsphuebner/stm32-sine/releases

	A wifi network should be visible with the name "inverter" connect to it with password "~~inverter 123~~"		A wifi network should be visible with the name "inverter" connect to it with password "inverter123"
	[[File:Screenshot 2020-06-20 at 8.33.04 am.png\|none\|thumb]]		[[File:Screenshot 2020-06-20 at 8.33.04 am.png\|none\|thumb]]

Ember: /* Programming Firmware */

2023-03-14T02:32:11Z

Programming Firmware

← Older revision		Revision as of 02:32, 14 March 2023
Line 368:		Line 368:
	The main firmware can be found here: https://github.com/jsphuebner/stm32-sine/releases		The main firmware can be found here: https://github.com/jsphuebner/stm32-sine/releases

	A wifi network should be visible with the name ~~''ESP-*''~~ connect to it		A wifi network should be visible with the name "inverter" connect to it with password "inverter 123"
	[[File:Screenshot 2020-06-20 at 8.33.04 am.png\|none\|thumb]]		[[File:Screenshot 2020-06-20 at 8.33.04 am.png\|none\|thumb]]

← Older revision		Revision as of 17:43, 20 December 2024
Line 1,010:		Line 1,010:

	The control board takes advantage of the [https://openinverter.org/wiki/Downloads OpenInverter.org software] for control.		The control board takes advantage of the [https://openinverter.org/wiki/Downloads OpenInverter.org software] for control.
			[[Category:Toyota]] [[Category:Inverter]]
	~~[[Category:OEM]]~~ [[Category:Toyota]] [[Category:Inverter]]