Tesla Model S/X GEN2 Charger: Difference between revisions

From openinverter.org wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:


v5 kit: https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-gen-2-charger-logic-board-kit
v5 kit: https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-gen-2-charger-logic-board-kit
v5 partially built board: https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-gen-2-charger-logic-board-partially-built
v5 partially built board: https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-gen-2-charger-logic-board-partially-built

Revision as of 02:21, 15 November 2020

The Tesla GEN2 is a single/three phase 10kW AC charger that was fitted in the Model S from 2012 until it was replaced in the 2016 'facelift' model with GEN3.

One or two GEN2 chargers are installed beneath the rear seats.

"Running a Tesla charger at much under 200v dc will cause it to explode. Yes I know the label says 50 to 450v but it lies. Yes I blew one up discovering this."


replacement control board https://github.com/damienmaguire/Tesla-Charger

v5 kit: https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-gen-2-charger-logic-board-kit

v5 partially built board: https://www.evbmw.com/index.php/evbmw-webshop/tesla-boards/tesla-gen-2-charger-logic-board-partially-built

Retrieved from "https://openinverter.org/wiki/index.php?title=Tesla_Model_S/X_GEN2_Charger&oldid=1128"