Nissan leaf motor couplers and adapter plates: Difference between revisions

Latest revision as of 03:12, 9 February 2025

cnc machined aluminum adapter plate for em57 motor

*the bearings in the leaf motor are not designed for axial loads introduced from a clutch and flywheel

a support bearing isnt required if the motor is just directly mated to another gearbox.

*refer to the drawing of the adapter plate when machining, and not the cad file, to ensure the machine is following accurate data

motor coupler drawing

@@ Line 1: / Line 1: @@
-[[File:Adapter plate.jpg|thumb]]
+[[File:Adapter plate.jpg|thumb|cnc machined aluminum adapter plate for em57 motor]]
-[[File:Leaf coupler.jpg|thumb]]
+=== adapter plates ===
-adapter plate for the em57 motor
-https://github.com/angusjo/leaf-splines/blob/master/adapterplate.SLDPRT
+* [https://bratindustries.net/product/em57-adapter-plate/ em57 adapter plate]
+* [https://bratindustries.net/product/gen-1-nissan-leaf-em61-motor-adapter-plate/ em61 adapter plate]
+* [https://github.com/angusjo/adapter-plate em57 cad files]
-motor shaft coupler for gen1/2/3 leaf (em61 and em57 motors) available by contacting brat industries: angusjohnson@protonmail.com
-[[File:0010-000-004 R00 LEAF COUPLER.jpg|thumb]]
+<nowiki>*</nowiki>the bearings in the leaf motor are not designed for axial loads introduced from a clutch and flywheel
+a support bearing isnt required if the motor is just directly mated to another gearbox.
+<nowiki>*</nowiki>refer to the drawing of the adapter plate when machining, and not the cad file, to ensure the machine is following accurate data
+=== motor couplers ===
+* [https://bratindustries.net/product/nissan-leaf-motor-coupler-2/ motor couplers]
+[[File:0010-000-004 R00 LEAF COUPLER.jpg|thumb|motor coupler drawing]]
 https://openinverter.org/forum/viewtopic.php?f=12&t=569
+[[Category:Nissan]] [[Category:Conversions]] [[Category:Mechanical]]