Chademo With Arduino Due: Difference between revisions
Jump to navigation
Jump to search
Created page with "Here's an outline for how I added Chademo to my Beetle conversion, other controllers my differ." |
Categories |
||
| (4 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
Here's an outline for how I added Chademo to my Beetle conversion, other controllers my differ. | Here's an outline for how I added Chademo to my Beetle conversion, other controllers my differ. The Due and shield board can be substituted with the Leaf VCU from EVBMW | ||
=== Required Parts === | |||
* Arduino Due | |||
* Shield Board (https://oshwlab.com/jamie84.jj/duechademo) | |||
* Isabellenhutte IVT or IVT-S shunt | |||
* 2x contactors | |||
* Chademo port | |||
* Relay | |||
* [https://github.com/jamiejones85/CHAdeMOSoftware Firmware] | |||
=== Connections === | |||
Wire up the socket as per the diagram below. | |||
[[File:Chademo Wiring.png|none|thumb|500x500px]] | |||
[[File:CHAdeMO-LeafVCU (1).png|none|thumb|600x600px]] | |||
[[Category:ChaDeMo]] | |||
[[Category:Rapid Charging]] | |||
Latest revision as of 17:50, 20 December 2024
Here's an outline for how I added Chademo to my Beetle conversion, other controllers my differ. The Due and shield board can be substituted with the Leaf VCU from EVBMW
Required Parts
- Arduino Due
- Shield Board (https://oshwlab.com/jamie84.jj/duechademo)
- Isabellenhutte IVT or IVT-S shunt
- 2x contactors
- Chademo port
- Relay
- Firmware
Connections
Wire up the socket as per the diagram below.
.png)