Tesla Model 3 Contactors: Difference between revisions
Jump to navigation
Jump to search
Kevin Sharpe (talk | contribs) (Created page with ""contactors get extremely hot from 12v power when closed for extended periods of time" ([https://openinverter.org/forum/viewtopic.php?f=10&t=738&p=10661#p10657 here]) Testing...") |
(Categories) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
Testing suggests that Tesla contactors require economizer circuits and it's important to note that the Open Inveter boards do not currently implement this functionality. | Testing suggests that Tesla contactors require economizer circuits and it's important to note that the Open Inveter boards do not currently implement this functionality. | ||
Model 3 contactor 12v amperage pull measured at 8.3A continuous (without economizer). | |||
GIGAVAC publish an application note on how to use contactors ([https://www.gigavac.com/sites/default/files/AN-016-Driving-Contactors-w-External-PWM.pdf here]) | GIGAVAC publish an application note on how to use contactors ([https://www.gigavac.com/sites/default/files/AN-016-Driving-Contactors-w-External-PWM.pdf here]) | ||
[[Category:Tesla]] [[Category:Contactor]] | |||
Latest revision as of 16:57, 20 December 2024
"contactors get extremely hot from 12v power when closed for extended periods of time" (here)
Testing suggests that Tesla contactors require economizer circuits and it's important to note that the Open Inveter boards do not currently implement this functionality.
Model 3 contactor 12v amperage pull measured at 8.3A continuous (without economizer).
GIGAVAC publish an application note on how to use contactors (here)