Using FOC Software

From openinverter.org wiki

Revision as of 07:34, 6 February 2020 by Johu (talk | contribs) (Created page with "Permanent magnet motors have turned out only to be well drivable when their stator current is controlled by means of a feedback current loop. Due to this, the existing feed fo...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Permanent magnet motors have turned out only to be well drivable when their stator current is controlled by means of a feedback current loop. Due to this, the existing feed forward controlled used for induction motors could not be extended for use with permanent magnet motors. Therefor the well known field oriented control approach was implemented in a separate software.

Retrieved from "https://openinverter.org/wiki/index.php?title=Using_FOC_Software&oldid=316"