Volkswagen Heater: Difference between revisions
Jump to navigation
Jump to search
Alexbeatle (talk | contribs) |
Alexbeatle (talk | contribs) |
||
Line 3: | Line 3: | ||
===Operating Voltage and Conditions === | ===Operating Voltage and Conditions === | ||
280VDC...450VDC | 280VDC...450VDC <ref>http://datasheets.dbk-worldwide.com/EN/Datasheets/WireHeaters/DBKITM_HV%20Water%20heater_eng.pdf</ref> | ||
===Pinout === | ===Pinout === | ||
Line 86: | Line 86: | ||
==References== | ==References== | ||
<references /> | <references /> | ||
[[Category:OEM]] | [[Category:OEM]] | ||
[[Category:VAG]] | [[Category:VAG]] | ||
[[Category:HVAC]] | [[Category:HVAC]] |
Revision as of 22:00, 15 October 2022
General Information
Operating Voltage and Conditions
280VDC...450VDC [1]
Pinout
HV connector HVA 280 KEY_E from TE
- +HV near to the body,
- -HV far from the body
LV Connector 1J0973714
- Pin 1 is permanent 12V
- Pin 2 is GND
- Pin 4 is LIN
LIN Bus Communication
ID | Description | Length | Checksum Type | Byte 0 | Byte 1 | Byte 2 | Byte 3 | Byte 4 | Byte 5 | Byte 6 | Byte 7 |
---|---|---|---|---|---|---|---|---|---|---|---|
28 | Control, every 50ms | 2 | ?? | Power | Last bit: Start/Stop | ||||||
48 | Feedback | 8 | ?? | Power:
13 = 770W 26 = 1540W |
?? | ?? | ?? | ?? | ?? | Temperature in | Temperature out |
Part Numbers
VW heater P/N are:
- 3Q0963231A
- 3Q0963231C
- 3Q0963231E
HV cable P/N is 3Q0971475 or 5Q0971475.
LV connector looks like it is Webasto 1J0973714 8P type.