Volkswagen Heater
Jump to navigation
Jump to search
VW heater P/N are:
- 3Q0963231A
- 3Q0963231C
- 3Q0963231E
LIN messages for the water heater:
ID 33 (0x61)
- length 8 Byte / ENHANCED Checksum
- Byte 0 =1 at HV voltage under 200V, =0 above 200V (below 200V it want work, so its a kinde of HV OK)
- Byte 1 =112, always, i dont know why
- Byte 2 =RPM as set via PID=32 in Byte 0
- (Byte 3 =110 below 200V, =14 above 200V, =46 when er running)
- Byte 3 bit 6= HV not OK
- Byte 3 bit 5= running
- Byte 5 =temperature 160 at 24°C, i don't know the scaling and what themperature that is til now
- Byte 6 =54 at 109V, =28 at 56V =83 at166V scaling: Voltage/2
ID28 is sent for control, every 50ms
Byte 0 is power, last bit of byte 1 starts and stops
HV cable P/N is 3Q0971475 or 5Q0971475.
LV connector looks like it is Webasto 1J0973714 8P type.
HV connector HVA 280 KEY_E from TE
- +HV near to the body,
- -HV far from the body
LV Connector 1J0973714
- Pin 1 is permanent 12V
- Pin 2 is GND
- Pin 4 is LIN