Volkswagen Heater

From openinverter.org wiki
Revision as of 16:13, 16 October 2022 by Crasbe (talk | contribs) (Added Link Backups to Web Archive)
Jump to navigation Jump to search
VW heater.jpg

General Information

Operating Voltage and Conditions

280VDC...450VDC [1]

Pinout

HV connector HVA 280 KEY_E from TE

  • +HV near to the body,
  • -HV far from the body


LV Connector 1J0973714

  • Pin 1 is permanent 12V
  • Pin 2 is GND
  • Pin 4 is LIN

LIN Bus Communication

Control and Answer Messages from/to Heater[2]
ID Description Length Checksum Type Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7
28 Control, every 50ms 2 ?? Power Last bit: Start/Stop
48 Feedback 8 ?? Power:

13 = 770W

26 = 1540W

?? ?? ?? ?? ?? Temperature in Temperature out


Part Numbers

VW heater P/N are:

  • 3Q0963231A
  • 3Q0963231C
  • 3Q0963231E




HV cable P/N is 3Q0971475 or 5Q0971475.

LV connector looks like it is Webasto 1J0973714 8P type.

References