(on hold) GS450H gearbox with oil pump + inverter + clutch + oil pump controller + some connectors

[celeron55]

NOTE (2020-09-06): I'm putting this offer on hold as I am now in the process of acquiring a suitable donor vehicle.

I'm considering selling the GS450H stuff I recently acquired from various places because I changed my design after already ordering parts, which was a bit silly but maybe it's for the benefit of someone else.

The GS450H stuff in question consists of:

- GS450H transmission with original oil pump and HV cables attached, without low voltage harness otherwise but oil pump connectors with stub wires are included (see photo)
- GS450H inverter, without low voltage harness
- GS450H "clutch" or whatever the input torque limiting disc for the transmission is called
- GS450H oil pump controller, without wiring harness
- The following connectors from auto-click.co.uk, for the transmission and oil pump controller low voltage signals:

Code: Select all

6189-0175 			2-AC422 	1 	£3.21 	£3.21 	
6189-1240 / 90980-12520 	8-AC001 	2 	£2.90 	£5.80 	
SUMITOMO 90980-12362 		9-AC004 	1 	£7.23 	£7.23 	
SUMITOMO 6189-1092 		13-AC001 	1 	£4.15 	£4.15 	
6189-1046 / 90980-12292 	5-AC052 	1 	£3.44 	£3.44 	

Everything was sold to me as used and working by various sellers on the internet and they look visually OK, but I haven't tested anything yet.

I'll set a starting price of 1550€ + shipping, for the whole lot. Feel free to make an offer.

Shipping from this expensive forest called Finland will be something like 668€ (that's quoted by TNT for a 200kg pallet to central Europe). Unless you can find me a cheaper shipping company or come grab 'em yourself of course.

EDIT: If you'd like to source the transmission locally (without the oil pump) and buy the rest from me (yes oil pump, no transmission), I'm currently willing to do that for 1050€. That will ship for a fraction of the cost.

I can also include a GS450H VCU board (without connectors or enclosure) that Damien gave me for software developing purposes, if you pay its list price of 150€ to Damien.

[jnsaff]

Shipping from Tallinn to anywhere on the way to London (+ around) can be arranged for much less than that. Hit me up if you want the contact, I got a pallet of batteries weighing about a tonne from London to Tallinn for 350 GBP.

[celeron55]

Shipping from Tallinn to anywhere on the way to London (+ around) can be arranged for much less than that. Hit me up if you want the contact, I got a pallet of batteries weighing about a tonne from London to Tallinn for 350 GBP.

I'm about 500km away from Helsinki, pretty much at the geographical center point of the country, so Tallinn doesn't help much. But thanks for the offer.

[celeron55]

If anyone needs a rough 3d model of the transmission for the purpose of checking whether it fits into something, I can make one for a bit of cash. (Obviously manually, as I don't happen to have any 3D scanners)

(I already have made models for the Leaf motor and inverter. Maybe I'll go set up an Etsy store or something for them too.)

[celeron55]

What would probably make more sense than sending the pallet with the transmission is sending the
- oil pump,
- inverter,
- clutch,
- oil pump controller and
- connectors
in a regular parcel. The buyer can then source a cheap transmission without oil pump locally, just like they like to sell those.

I'd be happy to part with that stuff for 1050€ + shipping. Shipping via post will be in the 50-150€ range to Europe.

Add 100€ for the transmission HV lines if you want them. Often transmissions come with them though. If you see any bits and bobs on my transmission you'd like to have (oil hose nipples, fill plugs or whatnot), just ask.