Configuaration
- 108 Cells
- 450 Volts
VW ID.3 62kwh Battery Pack Teardown
-
Gregski
- Posts: 2755
- Joined: Tue Sep 14, 2021 10:28 am
- Location: Sacramento, California
- Has thanked: 508 times
- Been thanked: 1012 times
- Contact:
VW ID.3 62kwh Battery Pack Teardown
this gentlemen does a proper 2021 VW ID.3 62kwh Battery Pack Teardown, hope you enjoy
Configuaration
Configuaration
You do not have the required permissions to view the files attached to this post.
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
-
Gregski
- Posts: 2755
- Joined: Tue Sep 14, 2021 10:28 am
- Location: Sacramento, California
- Has thanked: 508 times
- Been thanked: 1012 times
- Contact:
Re: VW ID.3 62kwh Battery Pack Teardown
Testing the VW id3 battery module balance port, important to know before you buy any BMS to it.
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
-
Gregski
- Posts: 2755
- Joined: Tue Sep 14, 2021 10:28 am
- Location: Sacramento, California
- Has thanked: 508 times
- Been thanked: 1012 times
- Contact:
Re: VW ID.3 62kwh Battery Pack Teardown
Capacity test VW id3 id4 battery module
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
-
Gregski
- Posts: 2755
- Joined: Tue Sep 14, 2021 10:28 am
- Location: Sacramento, California
- Has thanked: 508 times
- Been thanked: 1012 times
- Contact:
Re: VW ID.3 62kwh Battery Pack Teardown
Open up a VW id3 id4 lithium battery module.
You do not have the required permissions to view the files attached to this post.
"I don't need to understand how it works, I just need to understand how to make it work!" ~ EV Greg
-
arber333
- Posts: 3581
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 134 times
- Been thanked: 344 times
- Contact:
Re: VW ID.3 62kwh Battery Pack Teardown
Yeah... i just managed to burn some fuses in my modules. I will have to cut those modules and then figure out how to fix them in place since i will be cutting the back flange off...
After i repair the fuse i intend to glue the block back but for sure it wont be able to carry 30kg!!!