Hi,
I'm running Tesla gen3 charger with diy board and early SAM3X based code. I have noticed that charging does not work on ABB made charging stations, says it's an error on car side. What could be wrong and what can I check?
Type2 charging not working on some stations
-
uhi22
- Posts: 1085
- Joined: Mon Mar 14, 2022 3:20 pm
- Location: Ingolstadt/Germany
- Has thanked: 187 times
- Been thanked: 606 times
Re: Type2 charging not working on some stations
Do you have any chance to measure the CP with an oscilloscope? There could be not much wrong, the charger just needs one diode and two resistors to make the ABB happy. Or maybe the ABB is broken, and just providing a strange error message...
Github: http://github.com/uhi22 --- Patreon: https://www.patreon.com/uhi22
-
m.art.y
- Posts: 642
- Joined: Sat Jun 06, 2020 6:54 pm
- Location: UK/EU
- Has thanked: 35 times
- Been thanked: 32 times
Re: Type2 charging not working on some stations
Don't have osciloscope. Can I measure resistance or something? What must be the values of those resistors? I have never been able to charge at those ABB chargers while other people are charging there..