One of our Discord members suggested that I post here.
I've been working on an open source power distribution module that I would like to share with you.
While this device was originally designed for ICE applications (fuel pumps, coolant fans, ignition coils, etc.), it may be useful in projects here as well.
I was not aware of this project before, but I'm very interested in the topic and excited to start learning.
The dingoPDM is a 12V device that has:
- 2x 13A outputs (limited by DT connector pins)
- 6x 8A outputs
- 2x digital inputs (pullup or pulldown)
- CAN
https://discord.gg/jEgeMZja
(if that link is expired, just contact me on the store)
Documentation here (work in progress):
https://corygrant.github.io/dingoPDM/
I do sell pre-built units and other devices at (designed and built in Lynchburg, VA):
https://dingo-electronics.square.site/
Thanks and look forward to any idea/comments/suggestions in our Discord
Cory
