Calibrated RPM from PWM output on Zombieverter VCU for speed

[Rustybkts]

I am installing a Leaf drive unit to a Peugeot 106 Electrique.
The speedo used to be powered by a sensor sensing the teeth on a gear on the original drive motor.

Does the Zombieverter have a configurable RPM output using the PWM or alternatively an analogue output where I could drive an analogue to frequency converter.

[snelly1]

I would like drive a digital speedo to.
have you had any answer or have you do it another way?

[tom91]

The BMW E39 vehicle class has an engine rpm digital output. It is not configurable right now but this can be added in the future.