Leaf Gen2 Zombie RPM unstable

Post Reply
User avatar
geduxaz
Posts: 141
Joined: Wed Jun 23, 2021 7:00 am
Location: Lithuania
Has thanked: 13 times
Been thanked: 1 time

Leaf Gen2 Zombie RPM unstable

Post by geduxaz »

Hello. Tried to run Zombieverter with Leaf gen2 stack.
Got it turning, 190V, but RPM is unstable. Looks like one of three phases not good?
Top
User avatar
tom91
Posts: 2410
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 209 times
Been thanked: 572 times

Re: Leaf Gen2 Zombie RPM unstable

Post by tom91 »

190V is near the cutoff voltage so will give weird behaviour.

Also running the Leaf motor unloaded will result in strange rpm behaviour due to it being tuned for use in a vehicle.
Creator of SimpBMS
Founder Volt Influx https://www.voltinflux.com/
Webstore: https://citini.com/
Top
User avatar
geduxaz
Posts: 141
Joined: Wed Jun 23, 2021 7:00 am
Location: Lithuania
Has thanked: 13 times
Been thanked: 1 time

Re: Leaf Gen2 Zombie RPM unstable

Post by geduxaz »

Thanks! Will add more Voltage.
Zombie videos in Youtube show smooth unloaded rotation, thats why i started to question it..
Top
Post Reply

Return to “Vehicle Control (VCU)”