Selling parts I'm not going to use (Motor+Inverter & OBC)

[tfpe]

Hi!

I hope this post is okay.

I'm gradually learning more and more regarding a car EV conversion and it's something I'm looking forward to realising eventually. I'm selling a motor, inverter, and charger that I originally intended to use for an electric vehicle project. Since I've decided to go a different route with other components, these parts will no longer be used.

The motor (see label and screenshot in the folder below) is a UQM PowerPhase Pro 160 E-Motor.
Documentation for the motor is included, and I also have software for the inverter but I've never opened it. The inverter (see label) is matched to the motor and is a set.

The charger is a 22 kW onboard charger, model OBC42.1 from Innolectric (see label).

Approximate dimensions (cm):
• Motor – 27xØ28
• Inverter – 21x42x40
• Charger – 60x39x12

OEM .STP files are available for both the motor and inverter.

I have some photos and can provide more pictures or measurements if that's wanted. Feel free to ask if there’s anything I’ve forgotten to include.

Preferably selling everything as a kit, but the charger can be sold separately if there's interest. I'm not sure about exact market value, so feel free to make an offer and we can take it from there.

Located near Gothenburg, Sweden.

Images on my Dropbox: https://www.dropbox.com/scl/fo/4qnp8ti9 ... 0bfa9&dl=0

[tfpe]

Charger sold, inverter and motor still available