It's been a while and my project has ground to a halt, so I'm looking to pass on what I have.
I have 500 of the cells discussed here: viewtopic.php?p=6302#p6302 I got copper bus-bars made for creating packs, I went with 4s in the end. I have enough to make 10 4s/12p units. The link in the thread appears to be dead so I've attached the datasheet.
I also have leaf motor and inverter with an openinverter board in it.
Any reasonable offer considered.
Leaf motor and 36KWh of cells
-
doobedoobedo
- Posts: 263
- Joined: Sat Jan 12, 2019 12:39 am
- Location: UK
- Been thanked: 1 time
Leaf motor and 36KWh of cells
- Attachments
-
EIG_NCM-C020_Data-sheet.pdf- (125.91 KiB) Downloaded 61 times
-
Jacobsmess
- Posts: 748
- Joined: Thu Mar 02, 2023 1:30 pm
- Location: Uk
- Has thanked: 403 times
- Been thanked: 116 times
-
doobedoobedo
- Posts: 263
- Joined: Sat Jan 12, 2019 12:39 am
- Location: UK
- Been thanked: 1 time